Jet-Tronics Doppelventil High Flow (HF)
Jet-Tronics Doppelventil High Flow (HF)
Price: 176,00 € (incl. VAT.)
Net price: 147,90 €
61160-0060
Price
176,00 €
(incl. VAT.)
Net price:
147,90 €
Zum WarenkorbJet-Tronics Doppelventil High Flow (HF)
"Jet-Tronics Doublevalve High Flow" is a compact and light special valve with high air throughput matching for bigger cylinders.
By turning of receiver power pressure remains on gear-down position, so the gear is pneumatically locked.
Technical data:
| Supply voltage | 5 – 9V |
| Current consumption | 100 mA |
| Pressure range | 0 - 10 bar |
| Measurements (L/W/H) | 53 x 18 x 10 mm |
| Weight | 30 g |
| Connection | Schnellverbinder für Schläuche von 3 mm, auf Wunsch 4 mm Außendurchmesser |
Jet-Tronics Installationsbeispiele.pdf
Jet-Tronics HF-Valve.pdf
FAQ
My Jd-Valve loses air on connector (3)
What can I do?
If the air leaks out of (3) on the valve, it is in 95% the case, that it is a leakage of the pistons O-ring in one or even more of the cylinders. The leakage may happen in any position of the piston. Nearly all gear manufacturers have sometimes these problems.
To check if this is true, you should interrupt the air flow to the cylinders by closing (flat pliers) one of the lines on outputs (2) of the valve.
- If still air is leaking out of (3), then it’s the valve, if not, you should check your cylinders (Piston O-ring).
- In any case, I therefore recommend to insert an air filter in front of the system / the valves: Service / Accessories / Pneumatic accessory list, order no.: Z-071.
- The dirt mostly comes out of aluminium tanks and the pilling compressors.
- During the filling process dirt could also come into the system
Jet-Tronics Doppelventil High Flow (HF)
"Jet-Tronics Doublevalve High Flow" is a compact and light special valve with high air throughput matching for bigger cylinders.
By turning of receiver power pressure remains on gear-down position, so the gear is pneumatically locked.
Technical data:
| Supply voltage | 5 – 9V |
| Current consumption | 100 mA |
| Pressure range | 0 - 10 bar |
| Measurements (L/W/H) | 53 x 18 x 10 mm |
| Weight | 30 g |
| Connection | Schnellverbinder für Schläuche von 3 mm, auf Wunsch 4 mm Außendurchmesser |
Jet-Tronics Installationsbeispiele.pdf
Jet-Tronics HF-Valve.pdf
FAQ
My Jd-Valve loses air on connector (3)
What can I do?
If the air leaks out of (3) on the valve, it is in 95% the case, that it is a leakage of the pistons O-ring in one or even more of the cylinders. The leakage may happen in any position of the piston. Nearly all gear manufacturers have sometimes these problems.
To check if this is true, you should interrupt the air flow to the cylinders by closing (flat pliers) one of the lines on outputs (2) of the valve.
- If still air is leaking out of (3), then it’s the valve, if not, you should check your cylinders (Piston O-ring).
- In any case, I therefore recommend to insert an air filter in front of the system / the valves: Service / Accessories / Pneumatic accessory list, order no.: Z-071.
- The dirt mostly comes out of aluminium tanks and the pilling compressors.
- During the filling process dirt could also come into the system