Jet-Tronics Door-Sequencer

Jet-Tronics Door-Sequencer

Part no: 61160-0040

Price: 69,21 € (incl. VAT.)

Net price: 59,66 €

Part no:
61160-0040

Price
69,21
(incl. VAT.)

Net price:
59,66 €

-
+
In den Warenkorb

Jet-Tronics Door-Sequencer

The Jet-Tronics Door-Sequencer just needs one function to control one gear servo and three door-servos respectively pneumatic valves.

 

Technical data:

Technische Daten:

   Supply voltage    5 – 9V
   Current consumption    <10 mA
   Measurements (L/W/H)    50 x 39 x 15 mm
   Weight    27 g
Jet-Tronics Manual Doorsequencer de-en.pdf
 
Jet-Tronics Installationsbeispiele.pdf
 

FAQ
My Jd-Valve loses air on connector (3)


What can I do?

If the air leaks out of (3) on the valve, it is in 95% the case, that it is a leakage of the pistons O-ring in one or even more of the cylinders. The leakage may happen in any position of the piston. Nearly all gear manufacturers have sometimes these problems.

To check if this is true, you should interrupt the air flow to the cylinders by closing (flat pliers) one of the lines on outputs (2) of the valve.

  • If still air is leaking out of (3), then it’s the valve, if not, you should check your cylinders (Piston O-ring).
  • In any case, I therefore recommend to insert an air filter in front of the system / the valves:  Service / Accessories / Pneumatic accessory list, order no.: Z-071.
  • The dirt mostly comes out of aluminium tanks and the pilling compressors.
  • During the filling process dirt could also come into the system

 

Please upload as .zip file. (Maximum upload size: 10MB)
* mandatory fields

Jet-Tronics Door-Sequencer

The Jet-Tronics Door-Sequencer just needs one function to control one gear servo and three door-servos respectively pneumatic valves.

 

Technical data:

Technische Daten:

   Supply voltage    5 – 9V
   Current consumption    <10 mA
   Measurements (L/W/H)    50 x 39 x 15 mm
   Weight    27 g
Jet-Tronics Manual Doorsequencer de-en.pdf
 
Jet-Tronics Installationsbeispiele.pdf
 

FAQ
My Jd-Valve loses air on connector (3)


What can I do?

If the air leaks out of (3) on the valve, it is in 95% the case, that it is a leakage of the pistons O-ring in one or even more of the cylinders. The leakage may happen in any position of the piston. Nearly all gear manufacturers have sometimes these problems.

To check if this is true, you should interrupt the air flow to the cylinders by closing (flat pliers) one of the lines on outputs (2) of the valve.

  • If still air is leaking out of (3), then it’s the valve, if not, you should check your cylinders (Piston O-ring).
  • In any case, I therefore recommend to insert an air filter in front of the system / the valves:  Service / Accessories / Pneumatic accessory list, order no.: Z-071.
  • The dirt mostly comes out of aluminium tanks and the pilling compressors.
  • During the filling process dirt could also come into the system

 

Please upload as .zip file. (Maximum upload size: 10MB)
* mandatory fields