P180-NX

P180-NX

Part no: 71115-0065

Price: 3.550,00 € (incl. VAT.)

Net price: 2.983,19 €

Part no:
71115-0065

Price
3.550,00 €
(incl. VAT.)

Net price:
2.983,19 €

-
+
In den Warenkorb

JetCat NX Engines:

The next Generation: The completely newly developed JetCat P180-NX, P220-RXi, features a brushless, fully encapsulated fuel pump integrated on the turbine side as well as a brushless starter/generator system! The rotor of the fuel pump runs in the fuel, which eliminates the need for shaft seals. The starter/generator works completely contact-free to the turbine shaft. This makes the "clutch" from starter to turbine shaft resistant to all conceivable contamination (no slipping of the starter clutch due to contamination or O-ring wear, for example).

The specially developed non-contact clutch system also ensures that the brushless generator, in contrast to the turbine shaft, only runs at very low speeds (well below 10,000 rpm). This ensures a very high reliability and longevity of the entire starter/generator system.

Furthermore, the JetCat P220-RXi has been optimized for minimum system weight. The laser-welded housing is made of thin-walled stainless steel. The entire turbine including integrated brushless pump, valves, fuel filter as well as generator and charging system weighs only 1850g. In conjunction with the JetCat BMS system, it is also possible to use significantly smaller and thus lighter receiver batteries than previously required, since the receiver batteries are also constantly recharged during flight by the BMS system.

On the front side of the P180-NX/P220-RXi turbine there is also the integrated full metal fuel distribution system with fuel filter and electromagnetic shut-off valves. This fuel distribution system is milled from the solid and does not require any defective hose connections, fittings etc..

After starting the turbine, the connected turbine battery is recharged with high power via the generator. The electronics integrated on the turbine side control the charging current and voltage fully automatically. The turbine battery is also charged while the turbine is idling. Suitable receiver batteries can also be charged via the optional BMS system.

  • JetCat Autostart
  • Brushless starter/generator system of the connected turbine battery is recharged via the generator
  • Integrated, brushless, fully enclosed, fuel pump
  • Integrated all-metal fuel distribution system with fuel filter and electromagnetic shut-off valves
  • Suitable receiver batteries can also be charged via the optional BMS system.
  • Internal kerosene start and temperature sensor
  • ECU V12.0, digitized bus system for minimum cabling effort and integrated telemetry function
  • Connection of turbine to ECU with only one plug connection!
  • ECU with Auto-Power down function. ECU switches off automatically after cooling down process (RC system can be switched off, ECU remains ON until cooling down process is finished).
  • ID chip on the turbine side for convenient JetCat compatibility.
  • Operation via 3s LiFePo4 battery. (not included)
  • Low fuel consumption.
  • Fast acceleration
  • CFD-optimized, 5-axis milled micro compressor.
  • Proven, very fast JetCat kerosene start.
  • Internal bearing lubrication with 5% oil content.
  • Supplied with all accessories for installation and operation (without battery).
  • Made in Germany
  • 36 months warranty
Name Value
Pressure ratio 3,5
Mass flow (kg/s) 0,38
Consumption Full load (ml/min) 585
Consumption idle (ml/min) 120
Weight [g] 1710
Dimensions of the diameter (mm) 112
Length (mm) 283
Weight set in box (g)
Carton dimensions (LxWxH; cm)
Exhaust gas temperature (°C) 520-750
Idle speed (1/min) 32000
Max rpm (1/min) 126000
Thrust at idle (N) 7
Thrust @ maxRpm (N) 175
Exhaust gas velocity (km/h) 1658
Exhaust gas power output (kW) 40,3
SFC @ maxRpm (kg/Nh) 0,160
JetCat P180 NX.PDF
 
JetCat P180 NX Size.PDF
 
P180 NX Turbinenbefestigungsschelle ISO.PDF
 
P180 NX Turbinenbefestigungsschelle.PDF
 
Strahlturbinen_DE_JetCat_Beilagblatt_RXi_BMS-all.pdf
 
Strahlturbinen_DE_JetCat_RX_ 120218.pdf
 
Strahlturbinen_DE_JetCat_RX_RXi_120218.pdf
 
NX Connection Chart mit Telemetrie.pdf
 
NX Connection Chart ECU V12 mit Telemetrie.pdf
 
JetNet fuer P180.pdf
 
Please upload as .zip file. (Maximum upload size: 10MB)
* mandatory fields

JetCat NX Engines:

The next Generation: The completely newly developed JetCat P180-NX, P220-RXi, features a brushless, fully encapsulated fuel pump integrated on the turbine side as well as a brushless starter/generator system! The rotor of the fuel pump runs in the fuel, which eliminates the need for shaft seals. The starter/generator works completely contact-free to the turbine shaft. This makes the "clutch" from starter to turbine shaft resistant to all conceivable contamination (no slipping of the starter clutch due to contamination or O-ring wear, for example).

The specially developed non-contact clutch system also ensures that the brushless generator, in contrast to the turbine shaft, only runs at very low speeds (well below 10,000 rpm). This ensures a very high reliability and longevity of the entire starter/generator system.

Furthermore, the JetCat P220-RXi has been optimized for minimum system weight. The laser-welded housing is made of thin-walled stainless steel. The entire turbine including integrated brushless pump, valves, fuel filter as well as generator and charging system weighs only 1850g. In conjunction with the JetCat BMS system, it is also possible to use significantly smaller and thus lighter receiver batteries than previously required, since the receiver batteries are also constantly recharged during flight by the BMS system.

On the front side of the P180-NX/P220-RXi turbine there is also the integrated full metal fuel distribution system with fuel filter and electromagnetic shut-off valves. This fuel distribution system is milled from the solid and does not require any defective hose connections, fittings etc..

After starting the turbine, the connected turbine battery is recharged with high power via the generator. The electronics integrated on the turbine side control the charging current and voltage fully automatically. The turbine battery is also charged while the turbine is idling. Suitable receiver batteries can also be charged via the optional BMS system.

  • JetCat Autostart
  • Brushless starter/generator system of the connected turbine battery is recharged via the generator
  • Integrated, brushless, fully enclosed, fuel pump
  • Integrated all-metal fuel distribution system with fuel filter and electromagnetic shut-off valves
  • Suitable receiver batteries can also be charged via the optional BMS system.
  • Internal kerosene start and temperature sensor
  • ECU V12.0, digitized bus system for minimum cabling effort and integrated telemetry function
  • Connection of turbine to ECU with only one plug connection!
  • ECU with Auto-Power down function. ECU switches off automatically after cooling down process (RC system can be switched off, ECU remains ON until cooling down process is finished).
  • ID chip on the turbine side for convenient JetCat compatibility.
  • Operation via 3s LiFePo4 battery. (not included)
  • Low fuel consumption.
  • Fast acceleration
  • CFD-optimized, 5-axis milled micro compressor.
  • Proven, very fast JetCat kerosene start.
  • Internal bearing lubrication with 5% oil content.
  • Supplied with all accessories for installation and operation (without battery).
  • Made in Germany
  • 36 months warranty
Name Value
Pressure ratio 3,5
Mass flow (kg/s) 0,38
Consumption Full load (ml/min) 585
Consumption idle (ml/min) 120
Weight [g] 1710
Dimensions of the diameter (mm) 112
Length (mm) 283
Weight set in box (g)
Carton dimensions (LxWxH; cm)
Exhaust gas temperature (°C) 520-750
Idle speed (1/min) 32000
Max rpm (1/min) 126000
Thrust at idle (N) 7
Thrust @ maxRpm (N) 175
Exhaust gas velocity (km/h) 1658
Exhaust gas power output (kW) 40,3
SFC @ maxRpm (kg/Nh) 0,160
JetCat P180 NX.PDF
 
JetCat P180 NX Size.PDF
 
P180 NX Turbinenbefestigungsschelle ISO.PDF
 
P180 NX Turbinenbefestigungsschelle.PDF
 
Strahlturbinen_DE_JetCat_Beilagblatt_RXi_BMS-all.pdf
 
Strahlturbinen_DE_JetCat_RX_ 120218.pdf
 
Strahlturbinen_DE_JetCat_RX_RXi_120218.pdf
 
NX Connection Chart mit Telemetrie.pdf
 
NX Connection Chart ECU V12 mit Telemetrie.pdf
 
JetNet fuer P180.pdf
 
Please upload as .zip file. (Maximum upload size: 10MB)
* mandatory fields