Jet-Tronics Brake Valve / B- Valve
Jet-Tronics Brake Valve / B- Valve
Price: 108,00 € (incl. VAT.)
Net price: 90,76 €
61160-0030
Price
108,00 €
(incl. VAT.)
Net price:
90,76 €
Jet-Tronics Brake Valve / B- Valve
Jet-Tronics Brakevalve does not consume air while braking proportionally. A big advantage of this valve is the possibility to partly activate the brakes already in the air if the undercarriage is dropped. While touchdown the plane immediately decelerates due to the partly activated brakes which causes much shorter landing distances and it also prevents jumping of the plane. In case the runway is still too short, it is possible to program down elevator for full brake. A further advantage is that you can use the brakes during taxiing to the start point without being anxious to waste air.
Technical data:
Supply voltage | 5 – 9V |
Current consumption | 200 mA |
Pressure range | 0 - 10 bar |
Measurements (L/W/H) | 27 x 29 x 30 mm (without connectors) |
Weight | 32 g |
Connection | Universal connection 2.5 - 4 mm tubes (outer diameter) |
Jet-Tronics Installationsbeispiele.pdf
Jet-Tronics Manual Bremsventil Brakevalve B-Ventil B-Valve de-en.pdf
FAQ
My Jd-Valve loses air on connector (3)
What can I do?
If the air leaks out of (3) on the valve, it is in 95% the case, that it is a leakage of the pistons O-ring in one or even more of the cylinders. The leakage may happen in any position of the piston. Nearly all gear manufacturers have sometimes these problems.
To check if this is true, you should interrupt the air flow to the cylinders by closing (flat pliers) one of the lines on outputs (2) of the valve.
- If still air is leaking out of (3), then it’s the valve, if not, you should check your cylinders (Piston O-ring).
- In any case, I therefore recommend to insert an air filter in front of the system / the valves: Service / Accessories / Pneumatic accessory list, order no.: Z-071.
- The dirt mostly comes out of aluminium tanks and the pilling compressors.
- During the filling process dirt could also come into the system
Jet-Tronics Brake Valve / B- Valve
Jet-Tronics Brakevalve does not consume air while braking proportionally. A big advantage of this valve is the possibility to partly activate the brakes already in the air if the undercarriage is dropped. While touchdown the plane immediately decelerates due to the partly activated brakes which causes much shorter landing distances and it also prevents jumping of the plane. In case the runway is still too short, it is possible to program down elevator for full brake. A further advantage is that you can use the brakes during taxiing to the start point without being anxious to waste air.
Technical data:
Supply voltage | 5 – 9V |
Current consumption | 200 mA |
Pressure range | 0 - 10 bar |
Measurements (L/W/H) | 27 x 29 x 30 mm (without connectors) |
Weight | 32 g |
Connection | Universal connection 2.5 - 4 mm tubes (outer diameter) |
Jet-Tronics Installationsbeispiele.pdf
Jet-Tronics Manual Bremsventil Brakevalve B-Ventil B-Valve de-en.pdf
FAQ
My Jd-Valve loses air on connector (3)
What can I do?
If the air leaks out of (3) on the valve, it is in 95% the case, that it is a leakage of the pistons O-ring in one or even more of the cylinders. The leakage may happen in any position of the piston. Nearly all gear manufacturers have sometimes these problems.
To check if this is true, you should interrupt the air flow to the cylinders by closing (flat pliers) one of the lines on outputs (2) of the valve.
- If still air is leaking out of (3), then it’s the valve, if not, you should check your cylinders (Piston O-ring).
- In any case, I therefore recommend to insert an air filter in front of the system / the valves: Service / Accessories / Pneumatic accessory list, order no.: Z-071.
- The dirt mostly comes out of aluminium tanks and the pilling compressors.
- During the filling process dirt could also come into the system